Detail MODEL-4409 DYNAMIC AMPLIFIER
MODEL-4409
DYNAMIC AMPLIFIER
This amplifier system is used to input vibrating acceleration and sound noise into a data recorder using a piezoelectric accelerometer and a condenser microphone.
Designed for multi-channel vibration/ sound level measurement.
Composition
Amp Unit MODEL-4409-01 7pc
Power Supply MODEL-4409-12 1pc
Channel Case MODEL-4409-2* 1pc
Instruction manual 1copy
Specification
Applicable sensor
Condenser Microphone
PU SENS: 0.1Range 1.00-9.99mVrms/ Pa( = 0.1-1mVrms/ bar)
1 Range 10.0-99.9mVrms/ Pa( = 1-10mVrms/ bar)
Piezoelectric Type Accelerometer
PU SENS: 0.1Range 1.00-9.99pC/ UNIT maximum output 1000pC
1 Range 10.0-99.9pC/ UNIT maximum output 10, 000pC
10 Range 100-999pC/ UNIT maximum output 100, 000p
Sound Level Measurement
Measurement Range 50dBsL-130dBsL
( Case; PUSENS: 0.1? 70dBsL-130dBsL)
Full Scale Range -40dB-0dB-+ 40dB 10dB Step 0dB= 90dBsL
Frequency Response " LIN" : 2Hz-20kHz( 1dB)
" A" Weighting : Conformance with JIS or IEC
Vibration Measurement
Measurement Range 0.01UNIT-100UNIT FS
( Case; PUSENS: 0.1? 0.1-100UNIT FS)
Full Scale Range -40dB-0dB-+ 40dB 10dB Step 0dB= 1G
Frequency Response 2Hz-20kHz( 1dB)
Output BNC Connector 1V Full Scale Impedance 10k min
Over Load Indicator Lit when the output voltage exceeding 1.4Vrms or
exceeding the linear sphere.
Level Meter Analog meter for Monitor output level, Max hold
Cal signal 300 Hz 1% , sinusoidal wave, Output level Variable
Temperature, Humidity 0-50 C 90% RH max
Power Supply 12V DC( 10V-15V) , 2.5Atyp. 4Amax.
Size Weight In case of 7CH Type
325( W) 221.5( H) 302( D) mm 11.5kg
In case of 12CH Type
500( W) 221.5( H) 302( D) mm 17.5kg
Kontak kami:
Nama: Tn. Welly, Brandon, Ichsan [ Pemasaran]
Alamat: Jl. M. Yamin No. 183, Padang, Sumatera Barat, Indonesia
Nomer HP: 0812 677 6370, 0813 8112 1668, 0852 6302 0515
E-mail: sales@ rayaba.com
Tampilkan Lebih Banyak