MODEL-4409 DYNAMIC AMPLIFIER

MODEL-4409 DYNAMIC AMPLIFIER This amplifier system is used to input vibrating acceleration and sound noise into a data recorder using a piezoelectric accelerometer and a condenser microphone. Designed for multi-channel vibration/ sound level measurement. Composition Amp Unit MODEL-4409-01 7pc Power Supply MODEL-4409-12 1pc Channel Case MODEL-4409-2* 1pc Instruction manual 1copy Specification Applicable sensor Condenser Microphone PU SENS: 0.1Range 1.00-9.99mVrms/ Pa( = 0.1-1mVrms/ bar) 1 Range 10.0-99.9mVrms/ Pa( = 1-10mVrms/ bar) Piezoelectric Type Accelerometer PU SENS: 0.1Range 1.00-9.99pC/ UNIT maximum output 1000pC 1 Range 10.0-99.9pC/ UNIT maximum output 10, 000pC 10 Range 100-999pC/ UNIT maximum output 100, 000p Sound Level Measurement Measurement Range 50dBsL-130dBsL ( Case; PUSENS: 0.1? 70dBsL-130dBsL) Full Scale Range -40dB-0dB-+ 40dB
10dB Step 0dB= 90dBsL Frequency Response " LIN" : 2Hz-20kHz( 1dB) " A" Weighting : Conformance with JIS or IEC Vibration Measurement Measurement Range 0.01UNIT-100UNIT FS ( Case; PUSENS: 0.1? 0.1-100UNIT FS) Full Scale Range -40dB-0dB-+ 40dB
10dB Step 0dB= 1G Frequency Response 2Hz-20kHz( 1dB) Output BNC Connector 1V Full Scale Impedance 10k min Over Load Indicator Lit when the output voltage exceeding 1.4Vrms or exceeding the linear sphere. Level Meter Analog meter for Monitor output level, Max hold Cal signal 300 Hz 1% , sinusoidal wave, Output level Variable Temperature, Humidity 0-50 C
90% RH max Power Supply 12V DC( 10V-15V) , 2.5Atyp. 4Amax. Size Weight In case of 7CH Type 325( W) 221.5( H) 302( D) mm 11.5kg In case of 12CH Type 500( W) 221.5( H) 302( D) mm 17.5kg Kontak kami: Nama: Tn. Welly, Brandon, Ichsan [ Pemasaran] Alamat: Jl. M. Yamin No. 183, Padang, Sumatera Barat, Indonesia Nomer HP: 0812 677 6370, 0813 8112 1668, 0852 6302 0515 E-mail: sales@ rayaba.com